Save PLN 1500 per month on truck fuel costs
Statistics show that thanks to the regeneration of the truck DPF, its average fuel consumption can be reduced by 1.5-2 l/100 km. Thanks to this, you can save up to PLN 18,000 per year on one truck. Check how DPF PowerJet will help you to save every month.
Save PLN 1500 / per month on fuel costs
A new definition of effectiveness in the DPF filter regeneration sector with DPF PowerJet device
DPF PowerJet vs other devices
DPF PowerJet vs other devices
How will you save more?
Achieve unprecedented effectiveness, efficiency, the safety of regeneration and low operating costs. Save tens of thousands of PLN every month.
Only 4 steps separate you from saving 1500 PLN per month
If you expect measurable results, you can expect it from DPF PowerJet.
You make an appointment for a presentation of the DPF PowerJet machine, during which we show you the entire filter regeneration procedure.
We determine the form of financing for the purchase of the device, so that you can start saving as soon as possible with DPF PowerJet.
We sign the contract and complete all formalities. You don’t have to worry about anything. You make the advance payment at this stage.
3-4 weeks from signing the contract, we deliver the ordered DPF PowerJet straight to your location and train you in the use of the machine.
How much can you earn?
We have prepared a special calculator that will allow you to simulate real earnings. Just fill in some data, and you will know how quickly the device will pay for itself.
See for yourself!
Learn about the construction of PowerJet and its saving possibilities for you.
It is a system patented by us, thanks to which the regeneration time (cleaning and drying) is reduced to 30 minutes for passenger cars and 90 minutes for Euro 6 engine cartridges.
Check out the opinions by our clients
See what they say about our machines
We would like to share a positive opinion about the services of regeneration (cleaning) of diesel particulate filters in Scania vehicles provided by Zenessio company from Koziegłówki.
We chose this innovative form of regenerating DPF filters due to its effectiveness and efficiency, as well as the safety of the regeneration method ensured by DPF PowerJet technology.
We recommend the services provided by Zenessio Sp. z o.o. especially for those who are looking for a reliable partner for cooperation.
Our company deals with vehicle mechanics and transport. The market demand for DPF filter regeneration services, as well as the need to support our own fleet in this respect, prompted us to buy a regeneration machine that would handle all types of filters. The choice fell on the PowerJet V-MAX machine because it was solidly built, has good quality, and above all, it was able to safely regenerate even the largest filters.
V-MAX is extremely easy and intuitive to operate. Short cleaning cycles (while maintaining maximum efficiency) allow us to save the client's time, which is very satisfying for both parties.
We have been using the machine for two years and we are sure that it will serve us for many years to come. We truly recommend V-MAX to anyone who needs a filter regeneration machine.
We are a mobile service dealing with broadly understood truck tuning. The lack of power in a truck may be caused by the exhaust system, in most cases, the DPF filter is clogged. Before we found the DpfPowerJet offer, we outsourced the filter cleaning to other companies.
The need to buy your own cleaning machine coincided with the offer for
the most effective machine on the market we were presented with. We decided to check the operation of the machine on one of our vehicles and the results convinced us. DpfPowerJet V-MAX actually performs the cleaning
in the fastest and most efficient way. First of all, we needed a machine that would efficiently regenerate large filters in trucks, because before VMAX
we had the opportunity to check other regeneration service providers but the process of cleaning took too long and there were problems with drying large filters on top of that.
Thanks to the V-MAX machine, our customers do not wait long for the cleaning service, so they recommend us to their friends and their friends to their friends, so the number of satisfied clients is constantly growing.
We can honestly recommend the purchase of DpfPowerJet, which we have already done more than once and we know that more machines are going to be purchased. We are sure that our fellow automotive companies will be as satisfied with the purchase and use of the machine as we are.
Our transport company is located near Krakow. As the owner of a large fleet of large goods vehicles trucks and a provided of repair services for external customers, we know what problems caused by diesel particulate filters the truck owners have to deal with. We provided regeneration services and used the services of external companies ourselves until we came across an advert for the V-MAX machine on Facebook. We contacted the manufacturer and we got an offer quickly. We took advantage of the option of trying the machine before purchasing it for free on our filter and it was exactly what we needed. As declared by the manufacturer, the filter was cleaned and dried quickly and safely, ready for reinstallation in the vehicle. We compared different offers, but the V-MAX machine was there unbeatable when it comes to the regeneration of large-size exhaust after-treatment systems.
An important aspect in the selection was also the operating price of the machine compared to the cost of regenerating one filter, as well as the purchase of consumables. Now we can recommend the DpfPowerJet to any heavy goods vehicles repair shop. We are sure of the reliability of the machine and the dependability of the manufacturer when it comes to warranty aspects. It is very important to have the ability to react immediately in the event of any problems.
Our company provide services for heavy goods vehicles. We have been dealing with the regeneration of DPF filters for many years. We purchased our
first DPF cleaning machine 4 years ago. We have plenty of new clients through this service, however, the machine was inefficient and often required maintenance and assistance during the cleaning procedure. When we realised that there were more and more clients asking for this service and the machine we used was not efficient enough, we started to look for an alternative and came across an advertisement for V-MAX machine in social media. It turned out that the manufacturer is located near us and we had the opportunity to test the capabilities of this machine personally. We have made a decision we do not regret. DpfPowerJet is the most productive and effective tool for the regeneration of DPF filters and catalyst converters available in the market.
We have recommended this machine many times already and will gladly explain to those interested the differences in the operation of machines offered in the market as we have a lot of experience in this respect.
Our automotive company deals mainly with the repair and sale of turbines. We are located near Stuttgart. When the possibility of regenerating exhaust after-treatment filters emerged in the German automotive service market,
I became interested in the regeneration machines offered in the market.
I have received several offers from various manufacturers and have personally checked all that were located in Poland. As the last one, I visited Zenessio company in Silesia. Once I saw the machine I knew it was going to be the one for me. Incomparably better quality compared to the competition,
dimensions that allow even the largest filters to be placed in it
dimensions that allow even the largest filters to be placed in it It is possible to try the machine on site by cleaning your own filter, which proves that the manufacturer is not expecting negative feedback, and the duration of the regeneration cycle is exactly as it declares, unlike
the machines offered by other manufacturers.
I am a very satisfied owner of a DpfPowerJet V-MAX and not only that
I can recommend this cleaning machine to any car service in good conscience, but most importantly, I want to distribute V-MAX to other companies in Germany because I'm sure it is the most efficient machine in the market.
Frequently asked questions
Check out the frequently asked questions and find the answers to them.
Does DPF PowerJet protect the particle filter ceramic from damage?
DPF PowerJet eliminates the risk of displacement and damage to the ceramic insert of the particle filter (SafeClean system) without reducing the cleaning efficiency. A patent application was filed for this innovative solution.
What surface area do I need for the device?
The area requirements are very easy to meet. You just need a room with an area of min. 30 m2 with access to tap water, equipped with a three-phase 400 V power supply (32 A 5P socket) and a two-piston compressor (200 l). A ventilation system in the room will be an additional advantage.
Do I have to be a car mechanic to regenerate DPF filters with DPF PowerJet?
It is not necessary. We provide support at every stage of your DPF regeneration business. Work around the device is limited to inserting and removing the filter. The device does the rest.
How many truck filters am I able to regenerate?
DPF PowerJet takes 90 minutes to regenerate filters in trucks. This means that you can regenerate up to 6 filters within 10 hours of operation. Competing devices take up to 8 hours to renege on 1 filter.
Can I try the machine before buying?
Yes, of course! We offer each potential client a free exemplary filter regeneration performed on our machine.
What about the maintenance of the machine?
We provide comprehensive service and maintenance, so you can feel safe in this respect.
What are the operating costs of the machine?
The real costs depend on the filtration area – the larger the filtration area, the more DPF filters can be regenerated with one set of water filtration cartridges. DPF PowerJet is equipped with a tank with a capacity of 600 l, so it can clean a much larger number of filters than competing systems. In addition, the quick operation of DPF PowerJet means that the power consumption is much lower than in the case of other machines with similar characteristics.
Contact us and make an appointment to see for yourself DPF PowerJet in action.
Invest in innovation and save PLN 1500 per month in fuel costs for one truck.